Product

Tel:+86 23 6738 2007
Mobeil:+86 13883452222(General Feng)
E-mail:market@meikemold.com
Website:www.meikemold.com

Director:Ms.Lian
Tel:+86 23 6721 0599 
Mobeil:+86 188 8318 7088
E-mail:purchase@meikemold.com

Director: Ms.Huang
Tel:+86 23-6728 0800
Mobeil:+86 15086625080
E-mail:administration@meikemold.com

Inquiry

Inquiry

Time of issue:2020-03-17 00:00:00

What's App:+86 15360439294

WeChat:15360439294

Skype:8615360439294

Number of views:
1001

Ford Control Panel Mold

Retail price
0.0
Market price
0.0
Number of views:
1001
Product serial number
Specifications:
Machine Tonnage:
Plastic materials:
Quantity
-
+
Stock:
1
Describe
Parameters

Ford Control Panel Mold

Product features: firsly the product has high standard of surface, after the product is moulded, a layer of high gloss hard paint needs to be applied on the surface, so as to achieve high gloss piano finish; secondly it has high assemble standard, the product should matach with the electrical switch, the electrical button and display should be installed on the cansole frame, and then the panel will be installed, the console panel should be rigid after installed, and the space between each button should be within the tolerance, the assembly quality and product quality should not be affected by dismantling and re-assembly. 

Mould features: the adoption of mould steel: to meet the gloss surface requirement of the product, we use S136 steel imported from Sweden, the price of the material is high, but it has quite good function, from the earlier moulds made by Meike with this material, it has achieved over 500,000 shots. The proper heat treatment is to do quenching lower temperature tempering treatment.For quenching, the material should be heated to 1000-1050℃, and the temperature is maintained for some time (30min/25mm), and then put into oil to cool down to  50-100℃ and then immediately do tempering, to avoid cracks. By quenching 4 hours at 200℃, the hardness can be over HRC50, it has better polishing and anti-corrision performance. Even after long term use, the surface of the cavity still remains smooth, even when the mould is stored in humid environment, no special protection needed.For the mould structure design, considering it has high standard of quality srface, no flow marks or wave marks allowed on the surface, hot oil should be used for the cavity, the temperature should be heated to 80-95℃, and use multi gates, so as to achieve the fluidity and welding.Becuase of the direction of the structure, the design of the mould structure is more complex, the product should be obliquely ejected by 100mm and then straightly ejected, which is 2nd ejection, the product and the oblique insert are ejected, which makes the outer side of the product completed removed from the core, and then re-ejected.

 

Product dimensions:320*190*160mm

 

Mould dimensions:650*750*777

 

Weight of the mould:3000KG

Keyword:
mold
product
mould
Ford Control Panel Mold
design
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

RELATED PRODUCTS

© 2020 CHONGQING MEIKE MOLD ENGINEERING CO.,LTD  渝ICP备16009365号  POWERED BY:300.cn

© 2020 CHONGQING MEIKE MOLD ENGINEERING CO.,LTD  
渝ICP备16009365号  POWERED BY:300.cn