NEWS

Product

CONCERN

CONCERN

Time of issue:2020-03-17 00:00:00

1

The molds are exported to Sweden

  • Categories:NEWS
  • Author:Bill Feng
  • Origin:Bill Feng
  • Time of issue:2021-05-26 22:06
  • Views:

(Summary description)On May 25th, 2021, Our company received a batch of molds from Swedish customers and received acceptance from customers. The molds were shipped from Chongqing to Shanghai, where they were boarded and then shipped to Sweden.

This type of product, the customer has for three consecutive years have done similar products, product structure is simple, but extremely high requirement to the mold, mainly reflected in the molding cycle is too short, the product material is PP, shrink the original itself is very serious, shorten production cycle, it is easier to shrink, but the client on the appearance of the highly demanding, does not allow products are shrinking, so far, We changed the mold core material from the original steel material to alloy aluminum, and the intermediate needle with a diameter of 8mm was changed to alloy copper spray needle, so that the center part of the product was fully cooled, thus shortening the molding cycle.

Overseas markets as the yuan's appreciation and domestic prices are soaring, with labor costs also rose sharply, now domestic mold cost and foreign mold costs more and more near, give me this kind of export-oriented mold enterprises has brought great difficulties, loss of almost all profit space, if not strengthen, the processing link in engineering ability efficiently, the mold itself will not be able to take profits;

The molds are exported to Sweden

(Summary description)On May 25th, 2021, Our company received a batch of molds from Swedish customers and received acceptance from customers. The molds were shipped from Chongqing to Shanghai, where they were boarded and then shipped to Sweden.

This type of product, the customer has for three consecutive years have done similar products, product structure is simple, but extremely high requirement to the mold, mainly reflected in the molding cycle is too short, the product material is PP, shrink the original itself is very serious, shorten production cycle, it is easier to shrink, but the client on the appearance of the highly demanding, does not allow products are shrinking, so far, We changed the mold core material from the original steel material to alloy aluminum, and the intermediate needle with a diameter of 8mm was changed to alloy copper spray needle, so that the center part of the product was fully cooled, thus shortening the molding cycle.

Overseas markets as the yuan's appreciation and domestic prices are soaring, with labor costs also rose sharply, now domestic mold cost and foreign mold costs more and more near, give me this kind of export-oriented mold enterprises has brought great difficulties, loss of almost all profit space, if not strengthen, the processing link in engineering ability efficiently, the mold itself will not be able to take profits;

  • Categories:NEWS
  • Author:Bill Feng
  • Origin:Bill Feng
  • Time of issue:2021-05-26 22:06
  • Views:
Information

On May 25th, 2021, Our company received a batch of molds from Swedish customers and received acceptance from customers. The molds were shipped from Chongqing to Shanghai, where they were boarded and then shipped to Sweden.

This type of product, the customer has for three consecutive years have done similar products, product structure is simple, but extremely high requirement to the mold, mainly reflected in the molding cycle is too short, the product material is PP, shrink the original itself is very serious, shorten production cycle, it is easier to shrink, but the client on the appearance of the highly demanding, does not allow products are shrinking, so far, We changed the mold core material from the original steel material to alloy aluminum, and the intermediate needle with a diameter of 8mm was changed to alloy copper spray needle, so that the center part of the product was fully cooled, thus shortening the molding cycle.

Overseas markets as the yuan's appreciation and domestic prices are soaring, with labor costs also rose sharply, now domestic mold cost and foreign mold costs more and more near, give me this kind of export-oriented mold enterprises has brought great difficulties, loss of almost all profit space, if not strengthen, the processing link in engineering ability efficiently, the mold itself will not be able to take profits;

© 2020 CHONGQING MEIKE MOLD ENGINEERING CO.,LTD  渝ICP备16009365号  POWERED BY:300.cn

© 2020 CHONGQING MEIKE MOLD ENGINEERING CO.,LTD  
渝ICP备16009365号  POWERED BY:300.cn